327
[ESC+#F] Print Darkness
ESC #F ParameterHexadecimal code
<1B>
16
<23>
16
<46>
16
ab or aab
Initial value Refer to the table below.
When the power is OFF The set parameter is maintained.
Valid range within items The set parameter is valid until the next valid setting.
Valid range and term of
command
Valid range between items The set parameter is valid until the next valid setting.
[Function]
Specifies print darkness.
[Format]
<#F>ab
<#F>aab
• Parameter
a [Print darkness level specification]
1
↑ Lightest
2
3
4
5
6
7
8
9
10 ↓ Darkest
b [Print darkness specification]
A to F (omissible)
This parameter is usually "A".
The parameter valid range differs depending on the model. (Refer to the table below)
[Coding Example]
<A>
<#F>5A
<Z>
[Supplementary Explanation]
• Print darkness value specified by the command or LCD is maintained.
[Notes]
• If the value over valid range is specified, command error will occur and print darkness will not be
changed.
• Initial value is settable by default setting operation of the printer.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
