SATO CL6NX - Page 328

326
[Parameter Initial Value and Specified Range]
Model Head density Initial
value [aa]
Parameter
Valid Range
Print speed corresponding
to parameter
203 dpi 6 2, 3, 4, 5, 6, 7, 8, 9,
10
305 dpi 6 2, 3, 4, 5, 6, 7, 8
CL4NX
609 dpi 4 2, 3, 4, 5, 6
203 dpi 6 2, 3, 4, 5, 6, 7, 8, 9,
10
CL6NX
305 dpi 6 2, 3, 4, 5, 6, 7, 8
2: 2 (inch/s) 50.8 (mm/s)
3: 3 (inch/s) 76.2 (mm/s)
4: 4 (inch/s) 101.6 (mm/s)
5: 5 (inch/s) 127.0 (mm/s)
6: 6 (inch/s) 152.4 (mm/s)
7: 7 (inch/s) 177.8 (mm/s)
8: 8 (inch/s) 203.2 (mm/s)
9: 9 (inch/s) 228.6 (mm/s)
10: 10 (inch/s) 254.0 (mm/s)
Parent topic System Command