656
Timing chart
1) Normal process
2) Cancel process
The format of CAN will be STX SOH CAN "*****" ETX. (***** will be any item No. )
After sending CAN, please wait about 500 msec before sending the next data.
Avoid sending CAN while sending the print data (STX <A> - <Z> ETX).
With the above condition, the job may not be canceled or the item may not be printed correctly.
Status
Power On
Printer
RD
SD
Printer Status
Press the LINE
button
STX...ETX
1
EN
The format of ENQ will be STX SOH ENQ "*****" ETX. (***** will be any item No. )
Avoid ENQ transmission while sending the print data (STX ESC+“A” - ESC+“Z” ETX).
By sending ENQ, the status may not be returned or there may be print error.
Status
EN
Status
STX...ETX
2
Receive/Analysis/Edit (1) Receive/Analysis/Edit (2)
EN
EN
STX...ETX
3
Receive/Analysis/Edit (3)
Status
Status
Press the LINE button
EN
Printin
2
Printin
1
Initializin
Offline
Online
Buffer near full state
Buffer near full release
Printer
RD
SD
Printing (1)
Online
ENQ
Printing (2)
Printer Status
Receive/Analysis/Edit (1)
STX..ETX (1)
STX..ETX (2)
Status Status Status
500 msec
Status