676
LAN/Wireless LAN
Basic Specifications (LAN)
Basic Specificationss (Wireless LAN)
Specifications of software
Specifications of TCP/IP
Specifications of LPR
Specifications of FTP
NTP (Network Time Protocol)
Specifications of HTTP/HTTPS
Wireless LAN settings
Socket communication
Connection and Disconnection of session
TCP connection queue
Printer Status
Specification of SNMP
Switching LAN and WLAN
Notes
Parent topic Part 2 Interface Specification
Basic Specifications (LAN)
Interface
RJ45
Connector
Connector Type
RJ45
Cable Type
For 10BASE-T, 100BASE-TX (Category 5 or upper)
Length of cable
100 (m) or less
Link/Status LED
Lights when link is established with Ethernet device or when packet is received.
LED Color Operation
LED1 Green Lights at a moment after receiving packet (10ms)
Lights off when access point is recognized as 10BASE-T
Lights when access point is recognized as 100BASE-TX
LED2 Yellow
Lights when cable is disconnected
Protocol
Following communication protocol is configurable
Setting item Setting range
Protocol Return status 3
Return status 4 (Cycle response mode)
Return status 4 (ENQ response mode)(Default value)
Return status 5