601
Symbol Parameter name Valid range Acquisition method
d File size 0 to 999999999 (byte) Acquired up to ","
e File data - Equivalent to file size
[Return data format (normal)]
[ACK]<06>
16
[Return data format (when a command error occurs)]
[NAK]<15>
16
[Return data format (when the same file name error occurs)]
1<31>
16
[Exception processing]
Exception conditionParameter name
A value outside the
range is specified
The specified
size and received
size are different
When the same file name
Identifier Command error Command error -
File type Command error Command error -
File name Command error - Same file name error
File size Command error - -
File data - Invalid receive data -
Terminology Description
Command error Downloading not performed. The data received after a command error is
determined is not considered as a parameter of this command.
Same file name error The file is not saved.
Invalid receive data The data exceeding the file size is ignored.
[Supplemental explanation]
• Send this command when printing has stopped. The content of the response data is not
guaranteed even when this command is received during printing.
• When you specify SZPL for "Parameter a: Identifier ", "0: Font/logo", "1: TrueType font" settings
of "Parameter b: File type" will be ignored.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
