Symmetricom TimeProvider 2700 User Manual

098-00564-000 Revision A3 – July, 2013 TimeProvider 2300/2700 User’s Guide 147
Chapter 3
TimeProvider 2300/2700 CLI Command Set
To provision the following attributes of profile itu-g8265-1 for PTP master in eth2
port:
 ptp-state
 ttl
 dscp
 dither
 two-step
 unicast-negotiation
 lease-limit
 announce-limit
 sync-limit
 delay-limit
 priority-1
 priority-2
 domain
 timescale
Refer to Table B-39, Table B-40, and Table B-41 in Appendix B for range and default
values for PTP parameters.
TP2700>set ptp master config eth2 itu-g8265-1 ptp-state enable
TP2700>set ptp master config eth2 itu-g8265-1 ttl 200
TP2700>set ptp master config eth2 itu-g8265-1 dscp 200
TP2700>set ptp master config eth2 itu-g8265-1 dither enable
TP2700>set ptp master config eth2 itu-g8265-1 two-step enable
TP2700>set ptp master config eth2 itu-g8265-1
unicast-negotiation enable
TP2700>set ptp master config eth2 itu-g8265-1 lease-limit 800
TP2700>set ptp master config eth2 itu-g8265-1 announce-limit -4
TP2700>set ptp master config eth2 itu-g8265-1 sync-limit -7
TP2700>set ptp master config eth2 itu-g8265-1 delay-limit -7
TP2700>set ptp master config eth2 itu-g8265-1 priority-1 0
TP2700>set ptp master config eth2 itu-g8265-1 priority-2 0

Symmetricom TimeProvider 2700 Specifications

General

Brand	Symmetricom
Model	TimeProvider 2700
Category	Network Hardware
Language	English