TOMATECH AUTOMATION
［Data type］ Word axis
［Data meaning］ Rapid traverse rate as axis rapid override is F0
［Data unit］
Setting unit Data unit
Metric machine mm/min
Inch machine 0.1inch/min
［Data range］
IS-B IS-C
Metric machine 0～4000 0～4000
Inch machine 0～1500 0～1500
0 3 3 ZRNFLn
Chapter 3 Parameters
381
Volume Ⅲ Connection
［Data type］ Word axis
［Data meaning］ Low rate as axes return to machine zero
［Data unit］
Setting unit Data unit
Metric machine mm/min
Inch machine 0.1inch/min
［Data range］
IS-B IS-C
Metric machine 6～4000 6～4000
Inch machine 3～1500 3～1500
0 3 4 BKLn
［Data type］ Word axis
［Data meaning］ backlash compensation of each axis
［Data unit］
Setting unit IS-B IS-C
Metric machine 0.001 mm 0.0001 mm
Inch machine 0.0001 inch 0.00001 inch
［Data range］
Setting unit IS-B IS-C
Metric machine 0～2000 0～20000
Inch machine 0～2000 0～20000
Note : X is the diameter value.
0 3 6 SPDLC
［Data type］ Word spindle
［Data meaning］ Voltage offset for 0V analog voltage output of spindle min. speed code
［Data unit］ mV
［Data range］ -1000～1000
0 3 7 GRMAX1
0 3 8 GRMAX2
0 3 9 GRMAX3
To Next Page
Loading...