TOMATECH AUTOMATION
radius, the X axis value is specified by radius.
0 4 7 PRSn
［Data type］ Word axis
［Data meaning］ Setting value of absolute coordinate after machine zero return
［Data unit］
Setting unit IS-B IS-C
Metric input 0.001 mm 0.0001 mm
Inch input 0.0001 inch 0.00001 inch
［Data range］ -99999999～99999999
Chapter 3 Parameters
383
Volume Ⅲ Connection
0 5 1 MRCCD
［Data meaning］ Each feeding for G71, G72 rough turning cycle, which may also be
changed by
program code in auto running.
［Data unit］
Setting unit IS-B IS-C
Metric input 0.001 mm 0.0001 mm
Inch input 0.0001 inch 0.00001 inch
［Data range］
IS-B IS-C
Metric input 1～99999 1～999999
Inch input 1～99999 1～999999
0 5 2 MRCDT
［Data meaning］ Each retraction for G71, G72 rough turning cycle, which may also be
changed
by program code in auto running.
［Data unit］
Setting unit IS-B IS-C
Metric input 0.001 mm 0.0001 mm
Inch input 0.0001 inch 0.00001 inch
［Data range］ 0～99999
0 5 3 PECSCX
［Data meaning］ X retraction amount in G73, which may be also changed by program
code in
auto running.
［Data unit］
Setting unit IS-B IS-C
Metric input 0.001 mm 0.0001 mm
Inch input 0.0001 inch 0.00001 inch
［Data range］ -9999999～9999999
0 5 4 PECSCZ
［Data meaning］ Z axis rough turning retraction in G73, which may also be changed by
To Next Page