TOMATECH AUTOMATION
［Data meaning］ Pitch error compensation intervals
［Data unit］
Setting unit IS-B IS-C
Metric machine 0.001 mm 0.0001 mm
Inch machine 0.0001 inch 0.00001 inch
［Data range］
IS-B IS-C
Metric machine 1000～999999 10000～9999999
Inch machine 400～999999 4000～9999999
1 0 6 THD_SPD_VAR
［Data meaning］ Spindle fluctuation alarm limit in threading (not detect spindle
fluctuation alarm
if set to 0)
［Data unit］ %
［Data range］ 0～100
Formula=|current speed － previous period speed|×200/(current speed＋previous period
speed)
1 0 7 THD_TAIL_SPD
［Data meaning］ Short axis speed in threading run-out (run-out by threading feedrate if
set to 0)
［Data unit］
Setting unit Data unit
Metric machine mm/min
Inch machine 0.1inch/min
［Data range］ 0～8000
1 0 9 SPL_REV_SPD
［Data meaning］ Spindle jog speed (r/min)
［Data unit］ r/min
［Data range］ 1～8000
1 1 0 MGR
［Data type］ Word spindle
［Data meaning］ Gear ratio of encoder to spindle: spindle gear teeth number
［Data range］ 1～255
1 1 1 SGR
［Data type］ Word axis
388
Volume Ⅲ Connection
［Data meaning］ Gear ratio of encoder to spindle: encoder gear teeth number
［Data range］ 1～255
1 1 3 REF_SPDn
［Data type］ Word axis
［Data meaning］ Axes rapid traverse rates in machine zero return
［Data unit］
To Next Page