Audio Features
401
phone is greater than or equal to 500, the phone will send a warning alert quality
report to the central report collector; when the value of one way delay computed by
the phone is less than 500, the phone will not send a warning alert quality report to
the central report collector.
If it is set to blank, warning alerts are not generated due to one way delay. One-way
delay includes both network delay and end system delay.
Settings->Voice Monitoring->Warning threshold for Delay
phone_setting.vq_rtcpxr_delay_threshold_critical
It configures the threshold value of one way delay (in milliseconds) that causes phone
to send a critical alert quality report to the central report collector.
For example, if it is set to 500, when the value of one way delay computed by the
phone is greater than or equal to 500, the phone will send a critical alert quality report
to the central report collector; when the value of one way delay computed by the
phone is less than 500, the phone will not send a critical alert quality report to the
central report collector.
If it is set to blank, critical alerts are not generated due to one way delay. One-way
delay includes both network delay and end system delay.
Settings->Voice Monitoring->Critical threshold for Delay
VQ-RTCPXR Display
You can check the voice quality data of the last call via web user interface or phone user interface. You
can also specify the options of the RTP status to be displayed on the phone user interface. Options of the
RTP status displayed on the web user interface cannot be specified.
You can configure the softkey layout feature to display the RTP Status soft key during the conference. Then
you can press the RTP Status soft key to check the voice quality data with different parties. For more
information, refer to Softkey Layout.
Topic
VQ-RTCPXR Display Configuration
To Next Page
Loading...
Need help?
General
