Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
402
VQ-RTCPXR Display Configuration
The following table lists the parameters you can use to configure VQ-RTCPXR display.
phone_setting.vq_rtcpxr.states_show_on_web.enable
It enables or disables the voice quality data of the last call to be displayed on web
interface at path Status->RTP Status.
Settings->Voice Monitoring->Display Report options on Web
phone_setting.vq_rtcpxr.states_show_on_gui.enable
It enables or disables the voice quality data of the last call or current call to be
displayed on the LCD screen. You can view the voice quality data of the last call on the
phone at the path Menu->Status->More->RTP (RTP Status). You can view the voice
quality data of the current call by pressing RTP/RTP Status soft key during a call.
Settings->Voice Monitoring->Display Report options on phone
phone_setting.vq_rtcpxr_display_start_time.enable
It enables or disables the phone to display Start Time on the LCD screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1
(Enabled).
Settings->Voice Monitoring->Report options on phone->Start Time
phone_setting.vq_rtcpxr_display_stop_time.enable
It enables or disables the phone to display Current Time or Stop Time on the LCD
screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1
(Enabled).
To Next Page
Loading...
Need help?
General
