Yealink T40G Administrator's Guide

Audio Features
403
Default
1
Web UI
Settings->Voice Monitoring->Report options on phone->Current Time
Parameter
phone_setting.vq_rtcpxr_display_local_call_id.enable
<y0000000000xx>.cfg
Description
It enables or disables the phone to display Local User on the LCD screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1
(Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings->Voice Monitoring->Report options on phone->Local User
Parameter
phone_setting.vq_rtcpxr_display_remote_call_id.enable
<y0000000000xx>.cfg
Description
It enables or disables the phone to display Remote User on the LCD screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1
(Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings->Voice Monitoring->Report options on phone->Remote User
Parameter
phone_setting.vq_rtcpxr_display_local_codec.enable
<y0000000000xx>.cfg
Description
It enables or disables the phone to display Local Codec on the LCD screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1
(Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings->Voice Monitoring->Report options on phone->Local Codec
Parameter
phone_setting.vq_rtcpxr_display_remote_codec.enable
<y0000000000xx>.cfg
Description
It enables or disables the phone to display Remote Codec on the LCD screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1
(Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries