Configuring VLAN Based HVLAN Introduction
4-199
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
DELETE HVLAN INTERFACE
Syntax
DELETE HVLAN={ hvlanname-list | vid-range } INTERFACE={ type:id-
range | id-range | ifname-list | ALL }
Description Removes the interface association from the specified Hierarchical VLAN (HVLAN).
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DELETE HVLAN=S_300 INTERFACE=0.0,0.1
Option Description Default Value
HVLAN The list of provisioned HVLAN names, separated by a
comma, or the range of HVLAN IDs.
N/A
INTERFACE The interface where the HVLAN association is being
deleted.
N/A
To Next Page
Loading...
