Allied Telesis SwitchBlade x3100 Series User Manual

Introduction Configuring VLAN Based HVLAN
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
4-200
DELETE VLANTUNNELMAP VLAN
Syntax
DELETE VLANTUNNELMAP VLAN={ vlanname-list | vid-range | ALL }
HVLAN={ hvlanname | vid }]
Description Disassociates a VLAN from a VLAN-based HVLAN tunnel.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DELETE VLANTUNNELMAP VLAN=VOICE HVLAN=S_300
Option Description Default Value
VLAN The list of provisioned VLAN names, separated by a
comma, or the range of VLAN IDs.
ALL - All VLANs associated with this HVLAN
N/A
HVLAN The name or ID of the VLAN-based HVLAN tunnel N/A

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English