Allied Telesis SwitchBlade x3100 Series User Manual

Configuring VLAN Based HVLAN Introduction
4-201
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
DESTROY HVLAN
Syntax
DESTROY HVLAN={ hvlanname-list | vid-range | ALL }
Description Destroys the specified Hierarchical VLAN (HVLAN) or all HVLANs. An HVLAN cannot
be destroyed if interfaces are associated with it.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DESTROY HVLAN=S_200,S_300
Option Description Default Value
HVLAN The list of provisioned HVLAN names, separated by a
comma, or the range of HVLAN IDs.
ALL - all HVLANs are destroyed.
N/A

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English