To Next Page

To Previous Page

Introduction Configuring IGMP

Software Reference for SwitchBlade x3100 Series Switches (Internet Group Management

Protocol (IGMP))

5-12

ADD IGMPSNOOPING FLOODING

Syntax

ADD IGMPSNOOPING FLOODING

{ ALLSTANDARD | DVMRP | OSPFALL | OSPFDESIGNATED | RIP2 | IGRP |

| MDNS | CUSTOM=groupname GROUPADDRESS=ipaddress }

{ VID=vid-list }

Description Used to provision the reserved multicast IP addresses in the system, so that the provi-

sioned addresses can be forwarded instead of being dropped.

Options The following table gives the range of values for each option that can be specified with

this command and a default value (if applicable).

Example ADD IGMPSNOOPING FLOODING=ALLSTANDARD VID=401,402

Option Description Default Value

FLOODING The types of reserved mulitcast addresses.

ALLSTANDARD - All standard reserved mulitcast

addresses (DVMRP, OSPF All Routers, OSPF Desig-

nated Routers, RIP2, IGRP, DHCP RELAY, PIM, RSVP,

CBT, VRRP, DxCLUSTER, CISCONHAP, HSRP, and

MDNS.)

CUSTOM - Any unique name provided by the user for a

reserved multicast IP address other than the standard

reserved multicast IP addresses.

GROUPADDRESS - IP address of the reserved multi-

cast address being added by the user.

ALL

VID The VLAN list where this configuration will apply.

Allied Telesis SwitchBlade x3100 Series User Manual

Questions and Answers: