Configuring IGMP Introduction
5-15
Software Reference for SwitchBlade x3100 Series Switches (Internet Group Management Pro-
tocol (IGMP))
DELETE IGMPSNOOPING INTERFACE MACADDRESS
Syntax
DELETE IGMPSNOOPING INTERFACE={ type:id-range | id-range | ifname-
list | ALL } MACADDRESS={ macaddress-list | partial-macaddress-list
| ALL } [ FORCE ]
Description Used to delete either some or all of the set-top box (STB) MAC addresses that have
been configured for a given interface.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DELETE IGMPSNOOPING INTERFACE=1.23 MACADDRESS=
00:0C:25:00:13:8C
Option Description Default Value
INTERFACE The interface from which the MAC address was learned
MAC
Address
The MAC address as learned from the source address
field of a frame, or entered as part of a static filter entry.
Example: 00:0C:25:00:13:8C
To Next Page
Loading...
Need help?
General
