Allied Telesis SwitchBlade x3100 Series User Manual

Introduction Configuring IGMP
Software Reference for SwitchBlade x3100 Series Switches (Internet Group Management
Protocol (IGMP))
5-18
DISABLE IGMPSNOOPING
Syntax
DISABLE IGMPSNOOPING [ INTERFACE={ type:id-range | id-range |
ifname-list | ALL } ]
Description Used to disable the snooping feature and not intercept and monitor the IGMP protocol
messages. This command is used to disable the IGMP system-wide and also on port or
interface basis.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DISABLE IGMPSNOOPING INTERFACE=1.23
Option Description Default Value
INTERFACE
ALL Disable all interfaces (and therefore the system)

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English