Allied Telesis SwitchBlade x3100 Series User Manual

Introduction Configuring IGMP
Software Reference for SwitchBlade x3100 Series Switches (Internet Group Management
Protocol (IGMP))
5-20
RESET IGMPSNOOPING COUNTER
Syntax
RESET IGMPSNOOPING COUNTER [ { STANDARD | MESSAGERESPONSE | INTER-
FACE={ type:id-range | id-range | ifname-list | ALL } | CARD={
slot-list | ALL } } ]
Description Used to reset IGMP counters/statistics.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example RESET igmpsnooping COUNTER INTERFACE=1.23
Option Description Default Value
COUNTER STANDARD
MESSAGERESPONSE
INTERFACE
CARD The slot of the card where the counters will be reset.

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English