To Next Page

To Previous Page

Configuring Classifiers Introduction

6-25

Software Reference for SwitchBlade x3100 Series Switches (Access and Security)

DELETE CLASSIFIER INTERFACE

Syntax

DELETE CLASSIFIER=classifiername-list INTERFACE={ type:id-range |

id-range | ifname-list | ALL }

Description Deletes one or more CLASSIFIERs from one or more INTERFACE(s). This command

causes the specified CLASSIFIER(s), and their actions, to no longer affect traffic on the

specified INTERFACE(s). This command deletes every combination of specified CLASSI-

FIER(s) and INTERFACE(s) that actually exists. Note that the classifier is not deleted, only

the interface associations.

Options The following table gives the range of values for each option that can be specified with

this command and a default value (if applicable).

Example

DELETE CLASSIFIER=ipfilt1,ipfilt2,ipdrop INTERFACE=3.0

Option Description Default Value

CLASSIFIER The name of the classifier(s), separated by a comma

INTERFACE

ALL - Deletes all the specified interface(s) and classi-

fier(s) association.

ALL

Allied Telesis SwitchBlade x3100 Series User Manual

Questions and Answers: