Allied Telesis SwitchBlade x3100 Series User Manual

Introduction Configuring Classifiers
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
6-26
DESTROY CLASSIFIER
Syntax
DESTROY CLASSIFIER={classifiername-list|ALL}
Description Attempts to remove every specified CLASSIFIER from the system, and returns an error
message for any that cannot be destroyed. This command is allowed only if no interfaces
are currently associated with the CLASSIFIER(s).
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DESTROY CLASSIFIER=ipfilt2
Option Description Default Value
CLASSIFIER The name of the classifier(s), separated by a comma
ALL -
delete all interface associations for the classi-
fiers in one command.

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English