Configuring Classifiers Introduction
6-27
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
RESET CLASSIFIER COUNTER INTERFACE
Syntax
RESET CLASSIFIER COUNTER
INTERFACE={type:id-range|id-range|ifname-list|ALL}
[FORCE]
Description Resets (sets to 0) all CLASSIFIER counters associated with the specified INTERFACE(s).
There are 3 pre-defined CLASSIFIER counters for each INTERFACE, as described in
“SHOW CLASSIFIER INTERFACE COUNTER”.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
RESET CLASSIFIER COUNTER INTERFACE=1.23 FORCE
Option Description Default Value
INTERFACE The interface where the counters are reset
FORCE Resets the classifier without confirmation
To Next Page
Loading...
