Introduction Configuring the Egress Port Rate Limiting
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
6-64
DELETE EGRESSLIMITER INTERFACE
Syntax
DELETE EGRESSLIMITER=limitername INTERFACE={ type:id-range | id-
range | ifname-list | ALL }
Description Removes the association of an EGRESSLIMITER with one or more INTERFACEs. This
removes this limit on the traffic that the system transmits through this INTERFACE.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example DELETE EGRESSLIMITER=sub_gold INTERFACE=ETH:7.0
Option Description Default Value
EGRESSLIM-
ITER
The name of the EGRESSLIMITER that has already been
created.
INTERFACE The interface that will have the EGRESSLIMITER
deleted.
To Next Page
Loading...
Need help?
General
