Allied Telesis SwitchBlade x3100 Series User Manual

Password Recovery Introduction
1-39
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
ENABLE CONFIRMATION
Syntax
ENABLE CONFIRMATION
Description Used to re-enable confirmation prompts after they were disabled by the DISABLE CON-
FIRMATION command. By default, confirmations are enabled. When this command is
used, the settings only affect the current user session. No other user sessions are altered
or changed. When a user logs out, the confirmation settings are automatically restored to
enable confirmation prompts.
Options N/A
Example ENABLE CONFIRMATION

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English