Allied Telesis SwitchBlade x3100 Series User Manual

Introduction Configuring ARP
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
6-156
2.
officer SEC> ENABLE ARPFILTER INTERFACE=17.4
Info (010017): Operation Successful
officer SEC> SHOW ACCESSLIST iparpfilt
--- Access Lists --------------------------------------------------------
Name Interfaces Rule Action Fields
---------------- ---------------- ---- ------- -------------------------
iparpfilt ETH:17.4 1 DENY IPSOURCE=192.168.1.0
SOURCEMASK=255.255.255.0
-- DENY
-------------------------------------------------------------------------
Show how ARP filtering has been enablled for this interface.
ARP packets are blocked on classifier iparpfilt on inter-
face 17.4.
3.
officer SEC> SHOW ARPFILTER
--- ARP Filtering Configuration Data ---------------
Interface Status
--------------- -----------------------------------
ETH:11.0 DISABLED
ETH:17.0 DISABLED
ETH:17.1 DISABLED
ETH:17.2 DISABLED
ETH:17.3 DISABLED
ETH:17.4 ENABLED
ETH:17.5 DISABLED
ETH:17.6 DISABLED
TABLE 6-24 Configuration Procedure for ARP
Step Command Description

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English