Introduction Configuring ARP
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
6-158
DISABLE ARPFILTER INTERFACE
Syntax
DISABLE ARPFILTER INTERFACE={type:id-range|id-range|ifname-
list|ALL}
Description Used to disable the behavior of ENABLE ARPFILTER for the specified interface or inter-
faces.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
DISABLE ARPFILTER INTERFACE=17.4
Option Description Default Value
INTERFACE The interface where ARP will be disabled.
To Next Page
Loading...
