Allied Telesis SwitchBlade x3100 Series User Manual

Introduction Configuring ARP
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
6-160
SHOW ARPFILTER
Syntax
SHOW ARPFILTER [INTERFACE={type:id-range|id-range|ifname-list|ALL}
Description Displays ARP filtering configuration data for the specified interface or interfaces. If the
INTERFACE option is omitted then data for ALL interfaces will be displayed.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
officer SEC> SHOW ARPFILTER
--- ARP Filtering Configuration Data ---------------
Interface Status
--------------- -----------------------------------
ETH:11.0 DISABLED
ETH:17.0 DISABLED
ETH:17.1 DISABLED
ETH:17.2 DISABLED
ETH:17.3 DISABLED
ETH:17.4 ENABLED
ETH:17.5 DISABLED
ETH:17.6 DISABLED
Option Description Default Value
INTERFACE ALL

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English