To Next Page

To Previous Page

Configuring Local ARP Discard Introduction

6-173

Software Reference for SwitchBlade x3100 Series Switches (Access and Security)

DISABLE MACFF INTERFACE

Syntax

DISABLE MACFF INTERFACE={ type:id-range | id-range | ifname-list |

ALL } VLAN={ vid-range | vlanname-list | ALL }

Description Disables the MACFF function for the specified VLAN/Interface pairs. If INTERFACE=ALL

or VLAN=ALL is input, all applicable VLAN/Interface pairs that were enabled are dis-

abled.

Options The following table gives the range of values for each option that can be specified with

this command and a default value (if applicable).

Example

DISABLE MACFF INTERFACE=11.0 VLAN=301

Option Description Default Value

INTERFACE The INTERFACE(s) that are to be disabled for the

VLAN/Interface pairs.

VLAN The VLAN(s) that are to be disabled for the VLAN/

Interface pairs.

ALL If INTERFACE=ALL or VLAN=ALL is input, all applica-

ble VLAN/Interface pairs that were enabled are disabled

Allied Telesis SwitchBlade x3100 Series User Manual

Questions and Answers: