Allied Telesis SwitchBlade x3100 Series User Manual

Password Recovery Introduction
1-45
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
SET LOGIN BANNER (SEC)
Syntax
SET LOGINBANNER { FILE=filename | STRING=string }
[ { USER | MANAGER | SECURITYOFFICER | ALL } ]
Description Allows the Security Officer user to change the login banner.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example SET LOGINBANNER STRING="Allied Telesis SBx3112"
Option Description Default Value
FILE
If the FILE parameter is provided, the contents of
the file is retrieved and stored locally. The con-
tents of the file is also retrieved upon system
reboot. If the file is deleted or replaced, the local
storage of the loginbanner is not updated unless
the command is re-run or the system is rebooted.
STRING
If the STRING parameter is provided, the contents
of the string is stored locally and persisted for use
after system reboots. The maximum length of the
STRING value is 255 characters.
Security Level
The USER, MANAGER, SECURITYOFFICER and
ALL parameters define which user level(s) the log-
inbanner is applied to.

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English