Introduction Configuring LLDP
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
7-76
Wait for the network elements to exchange LLPDUs
Check the status of LLDP.
4
SHOW LLDP INTERFACE
--- LLDP Information ---
Remote
Interface Mode Remote Chassis ID Remote Port ID Management Address
--------- -------- ------------------- ------------------- ---------------
0.0 TX/RX MAC Address: Interface Name: IPv4 Address:
00:0C:25:00:FA:B9 ETH:11.0 10.52.66.60
0.1 TX/RX - - -
0.2 Off - - -
0.3 Off - - -
2.0 Off - - -
2.1 Off - - -
2.2 Off - - -
2.3 Off - - -
3.22 TX/RX MAC Address: Interface Name: IPv4 Address:
00:0C:25:00:FB:85 ETH:10.0 10.52.66.67
10.16 TX/RX - - -
10.17 TX/RX - - -
To deactivate LLDP, set the MODE to OFF
5
SET LLDP INTERFACE=0.0, 3.22 MODE=OFF
TABLE 7-8 Configuration procedure for LLDP
Step Command Description
To Next Page
Loading...
