Allied Telesis SwitchBlade x3100 Series User Manual

Introduction Configuring BFD
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
7-132
SETDEFAULTS BFD INTERFACE
Syntax
SETDEFAULTS BFD INTERFACE={ type:id-range | id-range | ifname-list
| ALL } [ INTERVAL ] [ DETECTIONMULTIPLIER ]
Description Restores on an interface the default interval and multiplier values
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
SETDEFAULTS BFD INTERFACE=8.18,8.19
Option Description Default Value
INTERFACE The interfaces where the BFD default values will be set.
INTERVAL Specifies the desired interval in milliseconds between
transmitted packets
200ms
DETEC-
TIONMULTI-
PLIER
The number of consecutive missed packets required to
declare a failure.
3

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English