Allied Telesis SwitchBlade x3100 Series User Manual

Event Logging TRACE Commands User Event Logging
8-39
Software Reference for SwitchBlade x3100 Series Switches (Alarms and Troubleshooting)
SETDEFAULTS TRACE
Syntax
SETDEFAULTS TRACE [ FORCE ]
Description Resets all the Event Logging settings to their default state. Logging is disabled and the
buffer is reset to its original size (and cleared). This will also generate an Event Log so
that the user can see that logging was reset at this point.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
SETDEFAULTS TRACE
Option Description Default Value
FORCE

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English