Allied Telesis SwitchBlade x3100 Series User Manual

User Event Logging Event Logging TRACE Commands
Software Reference for SwitchBlade x3100 Series Switches (Alarms and Troubleshooting)
8-38
SET TRACE BUFFERSIZE
Syntax
SET TRACE [ BUFFERSIZE=events [ FORCE ] ]
Description This command sets general options for all logs of a given type. The only available option
now is the Log Event buffersize. Resizing the buffer purges all current logs and creates a
new buffer for storing logs. This will also generate an Event Log so that the user can see
that the logging buffer was cleared at this point. The maximum size of the buffer is 10,000
logs.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example SET TRACE BUFFERSIZE=EVENTS
Option Description Default Value
BUFFERSIZE The number of log events 200 logs
FORCE

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English