Allied Telesis SwitchBlade x3100 Series - Page 923

Introduction Viewing the CPUSTATS (High Water Mark)
8-51
Software Reference for SwitchBlade x3100 Series Switches (Alarms and Troubleshooting)
RESET CARD CPUSTATS
Syntax
RESET CARD={ slot-list | ACTCFC | INACTCFC | ALL } { CPUSTATS [
TASKS ] }
Description Resets the CPU usage statistics (CFC only) and memory usage statistics (CFC only)
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example RESET CARD 4,5 CPUSTATS
Option Description Default Value
CARD slot-list - a comma delimited list of slots
ACTCFC - The currently active CFC, which can be slot
4 or 5.
INACTCFC - The currently inactive CFC
ALL - Both CFC cards
CPUSTATS CPUSTATS - CPUSTATS including per-task cpu data and
high water marks are reset.
TASKS - Resets the current counts associated with
tasks. These include the current 5 second, 1 minute, and
5 minute counts along with the associated highwater
mark values.