Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Move fuel line and line to activated charcoal filter clear at air
pipe.
– Remove air intake hose by releasing hose clips -2 and 5-.
– Move air intake hose with connected pipes -3 and 4- clear to
one side.
Note
Disregard -item 1-.
– Unplug electrical connector -arrow- at coolant temperature
sender - G62- .
Note
Illustration shows engine removed for greater clarity.
Install in reverse order.
1.4.5 Unplugging electrical connector on cool‐
ant temperature sender - G62- - vehicles
with 5.2 ltr. FSI engine
Procedure
– Pull off front engine cover panel -1- and rear engine cover
panel -2- -arrows-.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
1. Instrument cluster 91
To Next Page
Loading...
