Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Unplug electrical connector -2- on coolant temperature sender
- G62- -item 1-.
Install in reverse order.
1.4.3 Unplugging electrical connector on cool‐
ant temperature sender - G62- - vehicles
with 3.7 ltr. and 4.2 ltr. MPI engine
Procedure
– Pull off engine cover (rear) -arrows-.
– Unplug electrical connector on coolant temperature sender -
G62- -arrow- using assembly tool - T10118- .
Note
Shown from rear with engine removed for illustration purposes.
Install in reverse order.
1.4.4 Unplugging electrical connector on cool‐
ant temperature sender - G62- - vehicles
with 4.2 ltr. FSI engine
Procedure
– Pull off rear engine cover panel.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
90 Rep. gr.90 - Gauges, instruments
To Next Page
Loading...
