Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Detach air hoses -1- and -2- from turbocharger.
– Unplug electrical connector -3-.
Note
Before removing, mark running direction of poly V-belt with chalk
or felt-tipped pen. If the poly V-belt runs in the opposite direction
when it is refitted, this can cause breakage.
– To slacken poly V-belt turn tensioner in direction of -arrow-.
– Remove poly V-belt from alternator pulley.
– Release pressure from tensioner.
– Move electrical wiring clear at air pipe (front).
– Remove air pipe (front right) -arrows-.
– Unplug electrical connector -3-.
– Remove bolts -1- and -2-.
– Remove bracket and mounting for torque reaction support.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
44 Rep. gr.27 - Starter, current supply, CCS
To Next Page
Loading...
