Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Unscrew coolant pipe -1- at turbocharger and detach coolant
hose -3- at coolant pipe.
Note
Leave oil supply pipe -2- connected to turbocharger.
– Remove torque reaction support -arrows-.
– Detach coolant hoses -1- and -2- on back of alternator.
– Unscrew electrical wire at alternator.
– Unplug electrical connector.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
3. Removing and installing alternator 45
To Next Page
Loading...
