Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove cover for suspension strut turret (right-side) by de‐
taching spreader clip -1- and unscrewing bolt connection -2-.
– Pull cover out of retainers -arrows-.
– Remove bolts -arrows- and detach right air cleaner (top sec‐
tion).
– Unplug headlight connector -arrow- on both sides of vehicle.
– Detach bonnet seal.
– Pull out retaining clip and detach coolant hose (top) -arrow-
from radiator.
WARNING
Do not open refrigerant circuit of air conditioner.
Note
To avoid damage to the refrigerant pipes/hoses, take care not to
strain, kink or bend pipes and hoses.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
3. Removing and installing alternator 51
To Next Page
Loading...
