Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Special tools and workshop
equipment required
♦ Support bracket - 10 - 222
A-
♦ Adapter - 10 - 222 A /21-
♦ Engine support bracket,
adapters - T40093-
Removing
Note
All cable ties which are released or cut open when removing must
be fitted in the same position when installing.
– With ignition switched off, disconnect earth cable at battery
⇒ page 2 .
– Pull off engine cover (rear) -arrows-.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
68 Rep. gr.27 - Starter, current supply, CCS