Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Unscrew bolt -arrow-.
– Detach coolant pipe (bottom right) from coolant hose -1-.
Note
Disregard -item 2-.
– Screw the spindles for support elements -2- (left and right) at
subframe all the way down.
– Remove the locating lugs from the spindles.
– Remove the subframe -3- to the side.
Note
A second mechanic is required for removing the subframe.
– Screw the spindles for support elements -1- (left and right) at
engine cross member -4- all the way down.
– Unscrew bolts -arrows- for engine mountings (left and right).
– Remove engine cross member.
– Detach coolant hoses -arrows-.
– Remove bolt -1-.
– Remove coolant connection at engine oil cooler.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
5. Removing and installing starter 75
To Next Page
Loading...
