BST CCD CAM 100 User Manual

2
About Safety
14/198 CCD CAM 100 – Installation and Operating Manual
NOTICE
Damage to electronic components caused by ESD (electrostatic
discharge)!
Destruction/loss of capacity of electronic assembly elements
caused by contact with electro-statically charged persons/objects.
►
Only open system components at ESD-compliant workplaces
(according to 61340-5-1).
►
If there is no ESD-compliant workplace, take ESD protection
measures (according to DIN EN61340-5-1) to discharge electro-
static charges in a controlled manner.
►
When returning electronic assembly elements, adhere to DIN
EN 100015 (“Protection of protection of electrostatic-sensitive
devices”).
►
To transport electronic components, only use suitably marked,
electrically conductive ESD packaging.
NOTICE
Damage to the touchscreen due to faulty operation!
Use of sharp, strong or coarse objects (e.g. pens, gloves) may dam-
age the surface of the touchscreen.
►
Touch the touchscreen only using bare fingers or a special input
pen (touchpen).

BST CCD CAM 100 Specifications

General

Brand	BST
Model	CCD CAM 100
Category	Accessories
Language	English