Chery QQ - Page 203

Chery QQ Service Manual Transmission System
-101-
Chery Automobile Co., Ltd
Caution: When disassembling the propeller shaft assembly,
Be sure to prevent the rough touch and collision.
2. Disassembling the right shaft.
On the ground:
Loosen the rivet and remove the propeller shaft nut and gasket .
On the lift:
（1）Use plastic hammer to knock the propeller shaft universal joint to break the snap
ring away from differential universal joint splined hub.
（2）Disconnect the joint from the suspension arm.
（3）Remove the ball joint bolt and nut, and then disconnect the suspension arm
from the steering.
（4）For disassembling the propeller shaft assembly, first pull out the inner universal
joint from the output shaft, secondly pull out the end of wheel universal joint
from the universal joint.
1， Steering 2， Ball join
t
bolt and nut
Caution: When disassembling the propeller shaft assembly, be sure to prevent the
rough touch and collision.
（5）Let out the transaxles oil.