Chery QQ Service Manual
5. Position windshield
（1）Put windshield in right place
（2）Make reference marks on windshield
and car body
（3）Remove windshield
6. Clean the joint surface of windshield
Clean the black dirt with clean liquid on
the joint surface of windshield periphery
Attention：Do not touch windshield
surface after cleaning
7. Install water-resisting chips
As showed in the drawing，fix water-
7mm (0.28in)
resisting chips with double-side
adhesive tape
Attention：Do not touch windshield
surface after cleaning
8. Coat a layer of base paint M
bonding agent
base paint M
base paint M base paint M
on the joint surface of car body
Brush a layer of base paint M
onto the joint surface of car body
Attention：
（1）Wait for base coating layer
to dry over 3 minutes
（2）No coating on bonding agent
（3）Never reserve unsealed base paint M
for later use
- 261 – Chery Automobile Co.,Ltd
To Next Page
Loading...
