Cisco ASR 1000 Series

CHAPTER 8
Troubleshooting the ATM SPAs
This chapter describes techniques that you can use to troubleshoot the operation of your ATM SPAs.
•
General Troubleshooting Information, page 91
•
Performing Basic Interface Troubleshooting, page 93
•
Displaying Additional ATM SPA Data, page 95
•
Using the Cisco IOS Event Tracer to Troubleshoot Problems, page 100
•
Change in Informational Alarm, page 100
•
Preparing for Online Insertion and Removal of a SPA, page 101
General Troubleshooting Information
This section provides the following general information for troubleshooting ATM SPA cards and their SPA
interface processor (SIP) carrier cards:
Interpreting Console Error and System Messages
Refer to Cisco IOS XE System Messages document.
System error messages are organized in the documentation according to the particular system facility that
produces the messages. The SIP and SPA error messages use the following facility names:
•
Cisco ASR 1000 Series SIP:
◦
ASR1000_SIP
◦
ASR1000_SIP_SPA
•
Cisco WebEx Node SPA:
◦
SPA_SE1
◦
SPA_WMA
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 91