Cisco ASR 1000 Series

PurposeCommand or Action
Example:
PATH
Example:
AIS = 0 RDI = 0 FEBE =
28231 BIP(B3) = 5
Example:
LOP = 0 NEWPTR = 0 PSE = 0
NSE = 0
Example:
WIS ALARMS
Example:
SER = 0 FELCDP = 0 FEAISP =
1
Example:
WLOS = 0 PLCD = 0
Example:
LFEBIP = 7197878 PBEC = 5
Example:
Example:
Active Alarms[All defects]: None
Example:
Active Alarms[Highest Alarms]: None
Example:
Alarm reporting enabled for: SF SD SWLOF B1-TCA LAIS
LRDI B2-TCA PAIS PLOP PPLM SER FELCDP FEAISP WLOS
PLCD
Example:
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
168 OL-14127-17
Configuring the Ethernet SPAs
Configuring WAN-PHY Signal Failure and Signal Degrade Bit Error Rates