Cisco ASR 1000 Series Software Configuration Guide

• OC-12c/STM-4—622.080 Mbps
• OC-48c/STM-16—2.488 Gbps
• OC-192/STM-64 XFP—9.95 Gbps
Supported Features
The following features are supported for Packet over SONET (POS) SPAs on Cisco ASR 1000 Series
Aggregation Services Routers:
•
Small form-factor pluggable (SFP) and XFP optics module OIR
•
Field-programmable gate array (FPGA) upgrade support
•
IPv4 and IPv6 addressing
SONET/SDH Compliance Features
The Compliance features supported for the Packet over SONET (POS) SPAs on Cisco ASR 1000 Series
Aggregation Services Routers are as follows:
•
American National Standards Institute (ANSI) T1.105
•
ITU-T G.707, G.783, G.957, G.958
•
Telcordia GR-253-CORE: SONET Transport Systems: Common Generic Criteria
•
Telcordia GR-1244: Clocks for the Synchronized Network: Common Generic Criteria
SONET/SDH Error, Alarm, and Performance Monitoring Features
The performance monitoring features for the Packet over SONET (POS) SPAs on Cisco ASR 1000 Series
Aggregation Services Routers are as follows:
•
Signal failure bit error rate (SF-BER)
•
Signal degrade bit error rate (SD-BER)
•
Signal label payload construction (C2)
•
Path trace byte (J1)
•
Section Loss of signal (LOS)
•
Section Loss of frame (LOF)
•
Section Error counts for B1
•
Section Threshold crossing alarms (TCA) for B1
•
Line alarm indication signal (LAIS)
•
Line remote defect indication (LRDI)
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 185
Overview of the POS SPAs
Supported Features

Cisco ASR 1000 Series Specifications

General

Series	ASR 1000
Category	Network Router
Operating System	Cisco IOS XE
Memory	Up to 64 GB
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC options
Dimensions	Varies by model
Encryption	IPsec, SSL
Storage	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model