Cisco ASR 1000 Series Software Configuration Guide

alarm-trigger is not set
Framing is crc4, Line Code is HDB3, Clock Source is Line.
Data in current interval (571 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
0 Line Code Violations, 0 Path Code Violations,
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Setting the IP Address
To set the IP address for the 8-Port Channelized T1/E1 Serial SPA, complete these steps:
SUMMARY STEPS
1.
Router(config)# interface serial slot/subslot/port:channel-group
2.
Router(config-if)# ip address address mask
3.
Router(config)# exit
DETAILED STEPS
PurposeCommand or Action
Selects the interface to configure and enters interface
configuration mode.
Router(config)# interface serial
slot/subslot/port:channel-group
Step 1
Sets the IP address and subnet mask.
Router(config-if)# ip address address mask
Step 2
• address—IP address.
• mask—Subnet mask.
Exits interface configuration mode and returns to the EXEC
command interpreter prompt.
Router(config)# exit
Step 3
Verifying Interface Configuration
Use the show interfaces command to verify the interface configuration:
Router(config)# show interfaces
Serial6/0/1:0 is up, line protocol is up
Hardware is SPA-8XCHT1/E1
MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation HDLC, crc 16, loopback not set
Keepalive set (10 sec)
LCP Open, multilink Open
Last input 00:00:03, output 00:00:03, output hang never
Last clearing of "show interface" counters 5d17h
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 3194905708
Queueing strategy: fifo
Output queue: 0/40 (size/max)
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 227
Configuring the 8-Port Channelized T1/E1 Serial SPA
Required Configuration Tasks

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English