Cisco ASR 1000 Series Software Configuration Guide

•
Line diagnostics:
◦
Line alarm indication signal (LAIS)
◦
Line remote defect indication (LRDI)
◦
Line remote error indication (LREI)
◦
Error counts for B2
◦
Threshold-crossing alarms for B2 (B2-TCA)
•
Path diagnostics:
◦
Path alarm indication signal (PAIS)
◦
Path remote defect indication (PRDI)
◦
Path remote error indication (PREI)
◦
Error counts for B3
◦
Threshold-crossing alarms for B3 (B3-TCA)
◦
Loss of pointer (PLOP)
◦
New pointer events (NEWPTR)
◦
Positive stuffing event (PSE)
◦
Negative stuffing event (NSE)
•
The following loopback tests are supported:
◦
Network (line) loopback
◦
Internal (diagnostic) loopback
◦
SONET/SDH loopbacks
◦
T1/E1 loopbacks
•
The channelization that is supported:
◦
Framed or unframed T1s or E1s, which can be further channelized to DS0s.
•
Supported SONET/SDH synchronization:
◦
Local (internal) timing, for inter-router connections over dark fiber or wave division multiplexing
(WDM) equipment.
◦
Loop (line) timing, for connecting to the SONET/SDH equipment.
◦ +/– 4.6 ppm clock accuracy over the full range of the operating temperature.
T1/E1 Errors and Alarms
The 24-Port Channelized T1/E1 ATM CEoP SPA reports the following types of T1/E1 errors and alarms:
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17 463
Overview of the Circuit Emulation over Packet Shared Port Adapter
SONET/SDH Error, Alarm, and Performance Monitoring

Cisco ASR 1000 Series Specifications

General

Series	ASR 1000
Category	Network Router
Operating System	Cisco IOS XE
Memory	Up to 64 GB
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC options
Dimensions	Varies by model
Encryption	IPsec, SSL
Storage	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model