Cisco ASR 1000 Series Software Configuration Guide

Change SummaryDateRevision No.Release No.
Addition of information
pertaining to the support
for the following SPA:
•
1-Port and 3-Port
Clear Channel OC-3
ATM SPA
November 24, 2008OL-14127-03Cisco IOS XE Release 2.3
Addition of information
pertaining to the support
for the following SPAs:
•
2-Port and 4-Port
OC-48c/STM-16
POS SPA
•
1-Port Channelized
STM-1/OC-3 SPA
September 10, 2008OL-14127-02Cisco IOS XE Release 2.2
First release.April 25, 2008OL-14127-01Cisco IOS XE Release 2.1
Document Organization
This document is organized into the following chapters:
DescriptionTitleChapter
Provides an introduction to accessing the command-line interface (CLI) and
using the Cisco IOS software and related tools.
Using Cisco IOS XE
Software
Chapter
1
Provides a brief introduction to the SIP and SPA products on the Cisco ASR
1000 Series Routers, and information about the SIP and SPAs, and optics
compatibility.
SIP and SPA Product
Overview
Chapter
2
Describes release history, and feature and Management Information Base
(MIB) support for the SIP on the Cisco ASR 1000 Series Routers.
Overview of the SIPChapter
3
Describes related configuration and verificationConfiguring the SIPChapter
4
Describes techniques that you can use to troubleshoot the operation of the
SIP on the Cisco ASR 1000 Series Routers.
Troubleshooting the
SIP
Chapter
5
Describes release history, feature and Management Information Base (MIB)
support, and an introduction to the ATM SPA architecture on the Cisco ASR
1000 Series Routers.
Overview of the
ATM SPAs
Chapter
7
Describes the related configuration and verification information for the ATM
SPAs on the Cisco ASR 1000 Series Routers.
Configuring the
ATM SPAs
Chapter
6
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
xl OL-14127-17
Preface
Document Organization

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English